What's a good shutter speed for normal use of a point & shoot digital camera? Is 2-1/1000 good? - point and shoot shutter speed guide
Hello,
It also depends on the mesh (f-stop) and ISO. You have to balance all three. 1 / 1000 is very fast, which means they must Aperature far as possible, leaving open to more light. I have the camera in aperture priority mode mesh ( "A" on his selection mode) or program (P), they are usually in the face of the trigger for you.
For the normal shutter speed is usually about 1 / 40 ~ 1 / 160 seconds in the light of day. The hope that with your help to point and shoot camera.
Sunday, January 17, 2010
Point And Shoot Shutter Speed Guide What's A Good Shutter Speed For Normal Use Of A Point & Shoot Digital Camera? Is 2-1/1000 Good?
6 comments:
NO. U should be the "car-use" setting and let the camera do the work until it is a much better understanding of the photography.
Faster than the speed of the shot using a lens to open (open) and that the results difficult in very narrow depth of field and focus problems. In the average day of light, you should use an ISO 100 to 200 in the most direct and shooting at a stop around f W22 are equipped. Then let the camera selects the correct shutter speed for the F-stop and ISO settings match.
2-1/1000 sounds good.
With a little slower than, 1:10 say that you are need a tripod to avoid camera movement. So, if you travel with a tripod, the last 2 seconds slower plan is good.
With a little quicker than say, 1/500th, you probably direct pointing device sunlight. Thus, the fast end of the 1 / 1000 well.
Normally, the shutter speed between 1/40th and 1/200th of a second.
Yes, Plug and human car has Canna Bettner tartan.
The answer depends on what you plan on making an image and the desired effect.
Shutter speed to "stop" things - in other words, a moving vehicle or someone will be executed, because they do not move while shooting with fast shutter speeds, like 1 / 1000. If you want to appear is moving, you use a lot slower - 1 / 250 maybe.
Your shutter speed is also on the amount of light available and open hanging mesh (or 'f' stop) the camera is set. S & P Many cameras allow the shutter speed you want, and then set the Aperature for you. If there was enough light for what we are trying to do, sometimes you the speed (or sensitivity) of the camera - as the choice of another can be "faster" the film. Not all cameras you can change the ISO, but soon.
It may use some here.
It may use some here.
Post a Comment